Bambu Studio is not probably the most approachable software, however should you’ve made it this far, it should not be completely past your comprehension. For first-time setup, you will select your mannequin of printer (all Bambu fashions and a wholesome number of third-party printers are formally supported), depart the filament settings as they’re, and sign up if you wish to use Bambu’s cloud companies. These sync printer settings and hold observe of the fashions you save and obtain from MakerWorld, however a non-cloud LAN mode is on the market for the Bambu skeptics and privacy-conscious.
For any beginner, fairly a lot all that you must do is join your printer, open a .3MF or .STL file you’ve got downloaded from MakerWorld or elsewhere, choose your filament from the drop-down menu, click on “slice plate,” after which click on “print.” Issues just like the default 0.4 mm nozzle measurement and Bambu’s included Textured PEI Construct Plate are typically already factored in, although it’s possible you’ll must double-check these choices while you open a file for the primary time.
While you slice your construct plate for the primary time, the app will spit a pile of numbers again at you. There are two essential ones for 3D printing neophytes to trace. One is the “whole filament” determine, which tells you what number of grams of filament the printer will use to make your mannequin (filament usually is available in 1 kg spools, and the printer typically will not observe utilization for you, so if you wish to keep away from operating out in the midst of the job, it’s possible you’ll wish to hold observe of what you are utilizing). The second is the “whole time” determine, which tells you ways lengthy your entire print will take from the primary calibration steps to the tip of the job.
Andrew Cunningham
Deciding on your filament and/or temperature presets. In case you have the Computerized Materials System (AMS), that is additionally the place you will handle multicolor printing.
Andrew Cunningham
Andrew Cunningham
The primary solution to tweak print high quality is to regulate the peak of the layers that the A1 lays down.
Andrew Cunningham
Andrew Cunningham
Including some extra infill can add some energy to prints, although 15 % often provides an honest quantity of energy with out overusing filament.
Andrew Cunningham
The primary solution to tweak print high quality is to regulate the peak of the layers that the A1 lays down.
Andrew Cunningham
Including some extra infill can add some energy to prints, although 15 % often provides an honest quantity of energy with out overusing filament.
Andrew Cunningham
Andrew Cunningham
Andrew Cunningham
Andrew Cunningham
When choosing filament, individuals who stick with Bambu’s first-party spools can have the simplest time, since optimum settings are already programmed into the app. However I’ve had virtually zero hassle with the “generic” presets and the spools of generic Inland-branded filament I’ve purchased from our native Micro Middle, at the least when sticking to PLA (polylactic acid, the commonest and usually the easiest-to-print of the completely different sorts of filament you should purchase). However we’ll dive deeper into plastics partially 2 of this sequence.
